AquaForte Pond Pumps

The DM-Vario S pumps are suited for outdoor use and are suited for wet & dry applications. With the external controller you can adjust the flow (and thus the energy consumption) from 30% to 100%. The controller can also start/stop the pump (pause button). Provided with synchronous motor and wearproof ceramic shaft for long time use. Automatic power-off protection when running dry. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out.

The variable speed version of the popular O-Plus series! Specially designed for underwater applications. With the external controller you can adjust the flow (and thus the energy consumption) from 30% to 100%. The controller can also start/stop the pump (pause button). Provided with synchronous motor and wearproof ceramic shaft for long time use. Automatic power-off protection when running dry. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out.

Latest generation Sine Wave pond pumps with controller for variable speeds from 30 to 100%. Thanks to the Sine Wave technology, these pumps are even more economical in energy consumption. Moreover, they have more pump head than comparable pumps. The model is suitable for dry installation and can be installed in different positions thanks to the rotatable pump head. The professional filter basket is optionally available for use in the pond. Connection dimensions: 2″ external thread.

DM pumps are usually set up “dry” (but below the water level), for example after a sieve filter.

Very energy efficient pumps with innovative electronics! Low noise operation. Provided with synchronous motor. No copper parts. Durable ceramic shaft. Pump stops automatically when no water is detected inside the rotor. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out. Competitive priced dirty-water pumps for water gardens, waterfalls, fountains, filters, etc. Can pump solids up to 6mm. Suited for dry application (inlet must be under water level).

Very energy efficient pumps with innovative electronics! Low noise operation. Provided with synchronous motor. No copper parts. Durable ceramic shaft. Pump stops automatically when no water is detected inside the rotor. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out. Competitive priced dirty-water pumps for water gardens, waterfalls, fountains, filters, etc. Can pump solids up to 6mm. Suited for dry application (inlet must be under water level).

Competitive priced dirty-water pumps for water gardens, waterfalls, fountains, filters, etc. Provided with asynchronous motor. Can pump solids up to 6mm. Suited for dry application (inlet must be under water level).

Very energy efficient pumps with innovative electronics! Low noise operation. Provided with synchronous motor. No copper parts. Durable ceramic shaft. Pump stops automatically when no water is detected inside the rotor. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out. Competitive priced dirty-water pumps for water gardens, waterfalls, fountains, filters, etc. Can pump solids up to 6mm. Suited for dry application (inlet must be under water level).

A breakthrough in low-voltage pumps! Affordable 12-volt pumps that can provide up to 18600 l/h and 5 metres of pressure! Ideal for swimming ponds. Connections: 2″ male thread. Including strainer basket.

New series Low Voltage pumps based on the popular DM-Series! Ideal for swimming ponds or other applications where low voltage pumps are needed. Very energy efficient pumps with innovative electronics! Low noise operation. Provided with synchronous motor. No copper parts. Durable ceramic shaft. Pump stops automatically when no water is detected inside the rotor. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out. Competitive priced dirty-water pumps for water gardens, waterfalls, fountains, filters, etc. Can pump solids up to 6mm. Suited for dry application (inlet must be under water level).

Ideal for swimming ponds or other applications where low voltages is desired. Very energy efficient pumps with innovative electronics! Low noise operation. Provided with synchronous motor. No copper parts. Durable ceramic shaft. Pump stops automatically when no water is detected inside the rotor. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out. Competitive priced dirty-water pumps for water gardens, waterfalls, fountains, filters, etc. Can pump solids up to 6mm. Suited for dry application (inlet must be under water level).

Large flow pumps with low energy consumption! Useful for extra circulation in e.g. koi ponds and fi sh farms. Suited for low pressure applications (like drum and fleece filters). Can pump solids up to 6mm. Size: 23 x 20 x 32 cm. Pump outlet is Ø110mm for standard waste pipe & fi ttings (not supplied).