UltraSieve filters are the most reliable pre-filters on the market. This is partly due to the simple design, with just one moving part. The pre-filter is not self-cleaning, but it is very easy to maintain. Open the slide valve and the debris can be washed away. The UltraSieve pre-filters have a stainless steel filter element that never needs to be replaced. Thanks to the triangular stainless steel rods at a 7° angle, the water falls directly through the sieve, but the debris remains. A major advantage of this principle is that the debris is truly removed from the water circulation. This is highly beneficial to the water quality, because waste products are no longer polluting the water.
.
.
| Type | Art.nr. | Flow m³/h | Dimension L x W x H | Sieve element |
|---|---|---|---|---|
| UltraSieve III 200 (very fine) 2 inlets | SK210 | 30 | 65 x 37 x 100 cm | 200 Micron |
| UltraSieve III 300 (standard) | SK211 | 30 | 65 x 37 x 100 cm | 300 Micron |
| UltraSieve III 300 with 3 inlets | SK258 | 30 | 65 x 37 x 100 cm | 300 Micron |
• Large water capacity possible.
• The ‘LOW’ models have a high inlet (centre line at 50 cm).
• Easy to install.
• Flexibility of multiple inputs and outputs.
• Pre-filtration down to 200 or 300 microns.
• Maintenance-friendly.
| Type | Art.nr. | Flow m³/h | Dimension L x W x H | Sieve element |
|---|---|---|---|---|
| UltraSieve Low (2 inlets) | SK350 | 25 | 64 x 37 x 75 cm | 200 Micron |
| UltraSieve Low “L” (3 inlets) | SK354 | 35 | 64 x 53 x 75 cm | 300 Micron |
| UltraSieve Low “XL” (3 inlets) | SK200 | 40 | 64 x 73 x 75 cm | 300 Micron |
Aquaforte introduces 2 new skimmer sieves; the Midi and Low. Specially designed for natural swimming ponds/biopools where large flow and efficient waste collection are vital. The sets consists out of an UltraSieve Midi or Low with an extra inlet of Ø160mm, a wide mouth skimmer with a flange connection of Ø160mm. The supplied flexible coupling of Ø160mm allows a direct and easy connection. A large advantage of this system is that the Sieve unit can be build further away from the pond/pool with standard Ø160mm pipes and fittings! This way distances of > 10 meters are easily bridged! The skimmer has no strainer basket so all the waste goes directly to the sieve for easy maintenance! The Ø160mm flange with wide mouth skimmer is also separately available (to connect 2 skimmers on 1 skimmer sieve for example).
| Type | Art.nr. | Flow m³/h | Sieve element |
|---|---|---|---|
| SkimmerSieve Midi | SK360 | 12 | 300 Micron |
| SkimmerSieve Low | SK362 | 25 | 300 Micron |
The smaller version of the successful UltraSieve III is here! The perfect solution for pump capacities up to ±12m³/h (MidiSieve) or 15m³/h (MidiSieve XL). The most ideal pre-filter! Create a compact filter system by combining the UltraSieve MIDI with a beadfilter or other pump fed filters. The pump connection comes with a long suction pipe which draws the water from under the float to prevent air suction.
| Type | Art.nr. | Flow m³/h | Dimension L x W x H | Sieve element |
|---|---|---|---|---|
| MIDI Sieve 300 micron | SK332 | 12 | 56 x 27 x 74 cm | 300 Micron |
| MIDI Sieve XL 300 micron | SK348 | 15 | 56 x 27 x 89 cm | 300 Micron |
Compact version of the UltraSieve for use only in a pump fed configuration. Very easy to use: a dirty water pond pump is connected directly to the CompactSieve input. The water flows through the sieve which removes all particle matter down to a size of 300 micron. The CompactSieve must always be installed above pond level.
Applications:
The stainless steel screening element is 24 cm wide and 40 cm long and has a diameter of 300 microns. Max. capacity is ± 15m³/hour. Pump input via 3-stage hose barb.
of 25/32/40mm. Comes with lid. Spout and overflow protection 75mm, standard with cuff fittings. Available in dark green or blue granite PE.
| Type | Art.nr. | Flow m³/h | Dimension L x W x H | Sieve element |
|---|---|---|---|---|
| CompactSieve 300μ green | SK306 | 15 | 49 x 32 x 55 cm | 300 Micron |
| CompactSieve 300μ blue | SK308 | 15 | 49 x 32 x 55 cm | 300 Micron |
